For continuous delivery
The controller S-KG2 is recommended for continuous flow control in combination with the
micro annular gear pumps mzr-2521, mzr-2921 and mzr-4622. The 4-Q-DC servo amplifier
enables to control the constancy of flow rate via motor speed using the encoder mode of
operation. Speed can be adjusted either with an external voltage signal (0…10 V),
external current signal (4…20 mA) or an external potentiometer.
Advantages
- Pump controller for continuous delivery
- Good value 4-Q-DC servo amplifier
- Digital encoder regulator
- Compact plastic housing
- Speed set with external voltage signal, external current signal or external
potentiometer
- Current delimiter
- 10-pole pin headers for plug-in of mzr-pump
- Two colored LED status indicator
Technical data
Control
PID controller for motor speed
Supply voltage
24 V DC (6-30 V)
Max. continuous output current
0.5 A
Max. peak output current
1 A
Velocity range
200 - 6,000 rpm
Voltage
screw terminal
Pump connector
pin headers, 10-pole
Input for motor speed "An_in"
voltage signal 0 – 10 V;
current signal 4 – 20 mA;
external potentiometer 10 kiloohm
Enable input "Enable"
Enable: low (0 … 1.5 V);
Disable: high (5.5 V … UB)
Direction input "L/R"
Right direction: low (0 … 1.5 V);
Left direction: high (5.5 V … UB)
Speed output "Enc_out"
24 VDC, max. UB / 80 mA
Error output "Error"
24 VDC, max. UB / 1 A
No Error: high level
Operating temperature range
0 ... +50 °C (+122 °F)
Protection class
IP 20
Dimensions (L x W x H)
approx. 68 x 57 x 24 mm
Weight
approx. 44 g
Remarks
Subject to technical changes.
Notice
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.
This document is subject to change without notice.
Show more
Downloads
Back to list