For microreaction technology and
flow chemistry
The mzr-11558 micro annular gear pump of the hermetic and chemically inert series is,
considering its almost universal suitability for aggressive and corrosive media, a
revolution in the pump technology. Its rotors and functional elements being made of
ceramics, the pump shows the highest chemical resistance and an outstanding resistance
to wear. Thanks to the use of ceramics as bearing and shaft material, a magnetic
coupling, and case components made out of alloy C22 (DIN 2.4602), this pump will take up
any challenge in the chemical industry applications.
Advantages
- High resistance to corrosion
oxidizing and reducing media, acids and bases
- Hermetically sealed
magnetic coupling (NdFeB)
- Long service life
wear-resistant tungsten carbide
- Chemically inert pump head
alloy C22, SSiC, Al2O3 and ZrO2-ceramics
- Dynamic precision motor
brushless DC-motor with encoder
- High differential pressures
achievable even for low viscosity liquids
- Precise dosage, low pulsation
rotary micro annular gear technology, no valves
Applications
- Flow chemistry
- Microreaction technology
- Mini plant technology
- Filling electrolytes into battery cells
Flow charts
Technical data
Flow rate
0.192 - 1152 ml/min
Smallest dosage volume
100 µl
Displacement volume
192 µl
Maximum system pressure
60 bar (870 psi) (200 bar (2900 psi) *) (inlet pressure + differential pressure)
Differential pressure range
0 – 60 bar
Liquid temperature range
-5 ... +60 °C (-20 ... +100 °C *)
Viscosity range
0.3 - 1,000 mPas
Precision CV
< 1% (Coefficient of variation CV)
Velocity range
1 - 6000 rpm
Fluid connection
3/8" NPT internal thread, lateral
Wetted parts
Pump case alloy C22 (2.4602), optional: stainless steel 316L;
seals FFPM (Kalrez® Spectrum™ 6375), optional: FPM, EPDM;
shaft sintered silicon carbide (SSiC);
bearing and wetted functional parts Al2O3 ceramics;
rotors TAZ composite ceramics, optional: tungsten carbide Ni-based
Motor
Brushless DC-motor, IP 54, 42 V DC, max. 368 W
Encoder
500 counts per turn, type HEDL 5640
Electrical connection
motor cable length 3 m, 6-pole plug for motor winding, 12-pole plug for encoder and hall sensors
Dimensions (L x W x H)
301 x 130 x 129 mm
Weight
approx. 11000 g
Remarks
* with optional heat insulation module, Customized solutions on request.
Notice
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.
This document is subject to change without notice.
Show more
Downloads
Back to list